Phos-Xtract Bulk Phosphate remover 1.5 L / 2 LB Like Seachem PhosGuard

Description

Awesome Phos-Xtract Phosphate Remover Bulk compare to PhosGuard Extraxphos and more
Fresh or saltwater use
Removes Phosphate and silicates highly porous for high capacity Irreversible binding
Spherical for optimal hydrodynamics Won't cake
Binds 0.87 mg/g of PO4
its 1 1/2 times the product of the comparable 1L size Phosguard GREAT VALUE
May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, Awesome Phos-Xtract should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the Awesome Phos-Xtract, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. Awesome Phos-Xtract is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.